BKBS-06典型件的设计及工艺分析.docVIP

BKBS-06典型件的设计及工艺分析 工 学 部 工学二部 专 业 班 级 学 号 姓 名 指导教师 负责教师 2011年6月modeling in the design process with the UG software has completed the two-dimensional engineering plat with Auto the CAD. This article altogether divides into six parts, the first part to designed the components to carry on the overall analysis, and has made the approximate calculation to the components quality; The second part through components intensity examination, choice components material; Third part of basis components material formulation reasonable heat treatment craft; The fourth part selects t