阀体钻削夹具的设计【通过答辩毕业论文+CAD图纸】.doc

阀体钻削夹具的设计 摘 要床夹具主要用于加工体或支座类零件上的精密孔和孔系主要由模底座、支架、套、及必要的定位和夹紧装置组成。床夹具的种类按导向支架的布置形式分为双支承模、单支承模和无支承模 关 键 词： Valve Drilling Fixture Design Abstract  University of the end of four years undergraduate study, graduate design is one of the last link is the previously learned knowledge and skills acquired by the integrated use and Jian Yan. It is the foundation of knowledge and expertise of the unity of theory and practice, which has deepened our understanding of the knowledge and flexibility.  The graduation project is the subject of fixture design, fixture is the mechanical system, a process used in factory equipment, machine tools into jigs, welding fixtures, assembly fixtures and test jigs, etc., all kinds of metal cutting machine tools used for clamping workpieces process equipment, known as the machine tool fixture, this design is that machine tool fixture, which is the University of content required to complete a task, each student must complete a separate issue under their own, it is the school for four years for us to learn results of an examination, test our design capabilities and ability to solve problems alone, it contributes to the understanding of basic knowledge, logical thinking is conducive to exercise.  Fixture is an important component of the modular machine tool, it is used to achieve accurate positioning of parts to be processed, folder pressure, tool orientation, and loading and unloading the workpiece so the role of the time limit. The design of computational medium, but more than mapping. Need access to a large number of books full use of the knowledge.  This design is the design of the drilling hole drilling jig body. Drilling jig main body for processing or bearing parts on the fine holes and holes, the main base from the jig, frame, drill set, drill templates and the necessary positioning and clamping device component. Drilling jig according to the type of stent-oriented layout is divided into two-supporting jigs, single-bearing