三星重工对PSPC涂装的研究.ppt

Contents What’s problem? Why impractical rule ! Everything are evolving ! Everything are evolving ! Practice also ! Practice also ! History of WBT Paint Issues of Salt limit ? Recommendable Salt limit ? Achievable Salt limit ? Achievable Salt limit ? Inspection for Inspection Inspection for Inspection Effect of Excessive Inspection Effect of Excessive Inspection Scaffolding for Inspection Simulator for Training of Coating Tripartite Meeting 20th~21st September, 2007 What’s problem with PSPC ? 1 2 Effect of PSPC Impractical Rule for Shipbuilder. Remarkable quality improvement is not expected. Authority and Responsibility is not clear. Each shipyard has different practice because of difference of facility and process for the coating. However, PSPC require unified practice. Shipbuilder’s experience and practice have not been reflected in the PSPC. Even though, PSPC effect to the Shipyard facility, process and practice. Inspection for Inspection is required. Excessive inspections will not provide enhanced quality. Brush Roller Airless Spray Air Spray Electrostatic Spray Twin-feed Spray Soft Roller Soft Brush Brush-Roller? IACS/Industry Guideline allow to use brush or roller. However, shipowner’s intention was the brush during JWG meeting. R O L L E R B R U S H SP R A Y x 4 Microscope x 12.5 Microscope Magnified Photo Application Porosities can be found when 12.5 times magnified by microscope. The porosities will be covered by spraying of main coat. Automatic Cold Rolling Edge Grinding Disk Grinding Bite Milling 3 pass Grinding About 2mm R To reduce stripe coat However, PSPC requires that 2 stripe coats to be applied to the edges regardless of shape of edges. Shipyard experience was disregarded, even though, shipyard provide clear evidence. On the contrary, experience of the owner was adopted without any evaluation. Edge Grinding Bituminous Tar Free Epoxy Epoxy 1970s 1980s 1990s 2000s Tar Epoxy Modified Epoxy Tar Epoxy Tar Free Epoxy Modified Epoxy Epoxy 70~7