注塑模具培训澆口設計.ppt

OLE Technology Corporation 徐 昌 煜 Charles Hsu 歐磊科技股份有限公司 OLE Technology Corporation 塑膠射出成型問題和模具的關係 Mold Related Plastic Injection Molding Problems 矩形邊緣澆口設計 Rectangular Edge Gate Design L = 0.5 ~ 0.75 mm W = 澆口寬度 ( mm ) gate width in mm A = 型腔表面積 ( mm ) surface area of cavity in mm n = 材料常數 material constant 0.6 for PE, PS 0.7 for POM, PP 0.75 for ABS 0.8 for CA, PMMA, PA , PC 0.9 for PVC 2 2 h = n t h = 澆口厚度( gate thick. in mm ) t = 零件壁厚( wall thick. in mm ) W t L h 重疊式澆口設計 Overlap Gate Design W= w= 澆口寬度 [mm] gate width in mm A= 型腔表面積 [ mm ] surface area of cavity in mm n= 材料常數[ material constant ] 0.6 for PE, PS 0.7 for POM, PP 0.75 for ABS 0.8 for CA, PMMA, PA , PC 0.9 for PVC 澆口厚度[ gate thick. in mm] = nt 澆口長度[ land length in mm ] t= 零件壁厚[ wall thick. in mm ] 2 2 L1 = 0.5~0.75 L2 = h+( w/2 ) OLE Technology Corporation