电气工程专业英语unit6.ppt

6.4.1 Single-chip Microprocessor Control whereas the regular data bus is 8 bit. Allowing 14 bit for the program memory means that all instructions are just one word long. The device has three I/O ports, but many of the I/O bits can be used in different ways (such as for an on/off switch or ADC input), depending on how they are programmed. text 6.4.1 Single-chip Microprocessor Control In summary, a wide variety of microcontrollers are available. At the low end are the 4 bit models, which are more than adequate for appliances and toys. These tend to be large-volume, low-cost applications. Eigh