三维CAD知识辅助注射模具设计系统.pdfVIP

Int J Adv Manuf Technol (2003) 22: 387–395 DOI 10.1007/s00170-002-1514-9 ORIGINAL ARTICLE W. M. Chan Æ L. Yan Æ W. Xiang Æ B. T. Cheok A 3D CAD knowledge-based assisted injection mould design system Received: 5 June 2002 / Accepted: 23 August 2002 / Published online: 29 May 2003 Springer-Verlag London Limited 2003 Abstract This paper presents the basic structure of an system. Wang et al. [3] focused their research on the interactive knowledge-based injection mould design ejection system. Others focus their research on the system (IKB-MOULD). The basis of this system arises general design. Most research done on the general from an analysis of the injection mould design process injection mould system can be classified into two areas: for mould design companies. This injection mould de- (a) functional, conceptual and initial mould designs; sign system covers both the mould design process and and (b) algorithms to automate mould generation. mould knowledge management. IKB-MOULD inte- Functional, conceptual and initial designs of the grates the intelligent design process and knowledge injection mould are applied mainly to the pre-mould management with many developed interactive tools in a design. Such design involves selecting a suitable mould commercial solid modelling software environment. base, arranging the cavity layout, designing the runner and designing the gate. The objective is to come up with Keywords Injection mould design Æ Knowledge base Æ a large number of very different product ideas for a Injection mould object representation certain requirement. Britton et al. [4] addressed injection