南京工业大学 过程控制工程 试题 （ B ）卷（闭）.docVIP

南京工业大学 过程控制工程 试题 （ B ）卷（闭） 2006—2007 学年第1学期 使用班级 自03 A方向 班级 学号 姓名 题号 一 二 三 四 总分 得分 选择题：（1-6题为单选题每题3分，7-9题为多选题每题4分） The behavior of the controlled variable, CV, is important because... A It was selected to achieve one or more of the 7 control objectives. B The sensor measures this value C Large fluctuations create messy trend plots. The PID controller... A is non-linear. B is linear (obeys proportionality and superposition) C obeys proportionality only. D obeys superposition only. Which of the following statement(s) does NOT appear in the cascade control design criteria? A The secondary variable must indicate the occurrence of an important disturbance. B Only one valve can influence the secondary and primary variables. C The secondary variable dynamics must be faster than the primary variable dynamics D There must be a causal relationship between the manipulated and secondary variables. Which of the following statements are true for a valve positioner? A It is a secondary in a cascade control system. B It uses no measured variable. C It can improve the control performance for a slow feedback control loop. Cascade control involves two controlled variables, but only one valve. A The description is not correct; cascade involves two controlled variables and two valves. B The description is not correct; cascade involves one controlled variable and one valve. C Cascade control involves two controlled variables, but only the primary variable is controlled independently by the valve. D The degrees of freedom principle does not apply to a system with two controllers. The non-isothermal stirred tank chemical reactor is shown in the figure below. We want to control AC-1.? What is the best cascade design for the disturbances shown in the figure? A AC-1 - TC-1 - vc B AC-1 - AC-2 - vc C AC-1 - AC-2 - va The three modes of the most common feedback controller are called the... A Persistent