PP FSBS 2F滑石粉三元复合材料性能研究.pdfVIP

Vol.44 No.1 (Sum.285) 理论与研究 January 2016 DOI:10.15925/ki.issn1005-3360.2016.01.002 文章编号： （ ） 1005-3360 2016 01-0031-04 PP/SBS/滑石粉三元复合材料性能研究 Study on Properties of PP/SBS/Talc Ternary Composite 刘钰馨，杨芳，庞锦英，李建鸣 Liu Yuxin, Yang Fang, Pang Jinying, Li Jianming - 广西师范学院化学与材料科学学院，广西南宁 530001 - College of Chemistry and Materials Science, Guangxi Teachers Education University, Nanning 530001, China ( ) ( ) ( ) ●摘 要： 通过熔融共混制备了不同滑石粉 经偶联剂KH550表面改性 用量的聚丙烯 PP /丁苯热塑性弹性体SBS / ( ) 滑石粉复合材料 与 的配比固定为 ，同时研究了该复合材料的力学性能和流动性能。结果 PP SBS 90/10 表明 随着滑石粉用量的增加， 滑石粉复合材料的弹性模量和拉伸强度下降；弯曲性能、冲击性能 ： PP/SBS/ 和熔体流动速率则先提高后降低，且均在滑石粉用量为 份时达到最大值；另外添加了改性滑石粉的 10 PP/ SBS/滑石粉复合材料，其拉伸强度、冲击强度和熔体流动速率均高于未改性滑石粉填充的复合材料。 ●Abstract ： ( ) ( ) Polypropylene PP /styrene butadiene thermoplastic elastomer SBS /talc composites with different content of talc were prepared by melt blending method. In the PP/SBS/talc ternary composites, the ratio of PP and SBS was fixed at 90/10, and the talc was surface treated by coupling agent KH550. The mechanical properties and flowing property of the composites were investigated. The results indicate that with the increase of the talc content, the elastic modulus and tensile strength of the PP/SBS/t