外文翻译现代模具制造技术工艺和发展前沿其他专业.doc

中文4411字 英文资料 Modern Mold Manufacture And Development Of Cutting-edge Technology Materials based on the role of mold in different ways, can be summed up modern processing methods for mold removal method, molding method and the cumulative three types of law. Removal Act - mold material was removed and the necessary forms; forming method - the same total amount of material through the flow of materials and get the body; cumulative law - by the material continue to increase, the accumulated the necessary physical . 1.1 Removal of Mold Processing This is the largest mold maker for a class of methods, including machining, EDM (EDM, wire cutting, electrolytic, etc.), chemical processing, such as corrosion. Characterized by the shape-size components is removed from the blank material to be redundant. 1.1.1 Machining About 90% of the mold by milling, turning, grinding and other machining methods. They are mainly used to mold parts of the final processing aids, as well as working parts of the pre-mold processing and final processing. (1) high-speed machining and milling technology Because the mold cavity often with a large number of free-form surfaces, the traditional hand-made has been unable to meet the needs of the linkage of the three-axis or multi-axis CNC milling machine can solve the maximum extent of the problem in this regard. Therefore, CNC milling and programming tool also naturally become the focus of advanced manufacturing technology. (2) die cutting and multi-axis joint coordinate processing mode Forming the work surface grinding is a traditional method of finishing with a high-precision, high-performance advantages of degrees. In the mold manufacture, die cut shape is mainly used Ruled Surface finishing punch, die pieces and EDM electrodes and other components used. (3) The mold and polishing After surface machining, surface roughness, regardless of their size must be polished again. Mold Polishing Mold current research is still mainly manually