CCNA 官方幻灯片 第18章 ISDN.ppt

  1. 1、本文档共26页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
CCNA 官方幻灯片 第18章 ISDN

网络工程师讲义 张智勇 第十八章 综合业务数字网 (Intergrated Services Digital Network,ISDN) ISDN的起源和优点 ISDN起源于1968年 当时人们预测它将访问集成到广泛的服务的范围(语音、网络互联、报文交换和有线电视) ISDN基于模拟通信的优点 1、连接建立极快 2、比租用线路费用底 3、比模拟线路的传输速度更快 什么是 ISDN ISDN的两种服务方式 ISDN服务根据不同的信道数目分为: 1、BRI (Basi Rate Interface) 典型的ISDN BRI服务提供两个B信道和一个D信道 (2B+D) 应用于小型企业或家庭; 2、PRI(Primary Rate Interface) [北美和日本]提供的ISDN PRI服务提供二十三个B信道和一个D信道 (23B+D)速率可达1.544Mbps [欧洲]提供的ISDN PRI服务提供三十个B信道和一个D信道(30B+D) 速率可达2.048Mbps 应用于大型企业,PRI通过利用多个信道捆绑在一起,来实现高带宽 的网络环境。 ISDN 访问方式 BRI 和 PRI 是ISDN的两种常见访问方式 BRI 呼叫处理 ISDN 功能和参考点 硬件设备的主要功能 参考点的划分和不同的接口 Cisco ISDN BRI 接口 什么是按需拨号路由(DDR) 何时使用 DDR DDR 工作过程 DDR 工作过程 DDR 工作过程 DDR 工作过程 配置 DDR 配置 DDR 配置 DDR 任务 1: 指定路由信息 任务 2: 指定触发条件 任务 3: 配置拨号信息 根据实际情况在端口上设置拨号信息 任务 3: 配置拨号信息 DDR 配置总述 DDR 配置命令 设置启用第二个通道传输数据的条件 设置会话切断前的延迟时间 DDR 配置举例 查看ISDN 信息 查看ISDN 信息 Purpose: This figure further highlights ISDN hardware standards and reference points for native and non-native ISDN devices. Emphasize: Non-native ISDN devices, TE2s lack an ISDN BRI interface. To configure this device add an external TA to the serial interface; the TA contains the BRI S/T interface. If the router does not have an NT1 interface, an external one must be provided. A simple way to check if the router is equipped with a built in NT1 is to check if it has an S/T or U interface. If the router has an S/T interface, it does not have a built in NT1. If it has a U interface, it has a built in NT1. Note: Never connect a router with a U interface to an NT1 device because it could result in problems with the hardware. Purpose: This figure introduces students to DDR. Emphasize: Explain that DDR is used to refer to a collection of dialup features. Purpose: This figure explains when one would want to use DDR. Emphasize: DDR is used for low-volume, periodic connections when traffic demands do not dictate the use of a dedicated line. DDR addresses the need for periodic network connections over a circuit-switched WAN service. By using

文档评论(0)

zhuwenmeijiale + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:7065136142000003

1亿VIP精品文档

相关文档