开关稳压电源外文文献及翻译(英文).doc

DC Switching Power Supply Protection Technology Posted:2006-2-26 10:57:00 ??visit:665 chinese Version ?Related News Abstract: The DC switching power supply protection system is proposed to protect the system design principles and machine protection measures, analysis of switching power supply in the range of protected characteristics and design method, introduced several practical protection of circuit. Keywords: switching power supply protection circuit system design 1 Introduction ????????DC switching regulator used in the price of more expensive high-power switching devices, the control circuit is also more complex, In addition, the load switching regulators are generally used a large number of highly integrated devices installed electronic systems. Transistors and integrated device tolerance of electricity, less heat shocks. Thus switching regulator should take into consideration the protection of voltage regulators and load their own safety. Many different types of protection circuits introduced here polarity protection, program protection, over-current protection, over-voltage protection, under voltage protection and thermal protection circuits. Several protection methods are usually chosen to be combined to form a comprehensive protection system. 2 Polarity Protection ????????DC switching regulators input are generally not regulated DC power supply. Due to operational errors or unforeseen circumstances will be the wrong polarity, switching power supply will be damaged. Polarity protection purposes, is to make the switching regulator only when the correct polarity is not regulated to DC power supply when connected to work. The use of a single wizard-pass device can achieve the power supply polarity protection. As the diode D to flow through the switching regulators input total current, so this circuit applied in a low-power switching regulators on the more appropriate. Power in the larger occasion, put the polarity protection circuit as a program to prot