全自动圆边双边磨-保特罗.PDF

BOTTERO Gemini 306 Gemini 306 Gemini 306 Gemini 306 Gemini 306 90 1/6 021-6427-4666 V. 1112 BOTTERO Gemini 306 A. Base and mobile shoulder system 2 The machine comprises of quite a large electro-welded steel base (over 2 meters). The fixed shoulder and mobile shoulder rest on this base. Machine bearing: round shaft with bush runner for both side, it ensure the machine base smoothly moving on the width direction. The shoulder slide has some grooves which allow the lubricating oil to arrive in each point of the sliding surfaces. ensure the machine stability, without shaking. Automatically lubricate system to the ball screw and round guide. One motor driving the bridge opening and closing system it control by a pair of screws. ensure the positioning The opening and closing system comprises of a pair of screw shaft that are engaged with precision round shaft with bushboth heat treated to ensure a high superficial hardness providing precise and long life time . 2/6 021-6427-4666 V. 1112 BOTTERO Gemini 306 B. Spindle 3 V 3 High precise V shaft has been greased. Waterproof system can prevent water filtering the bearing. The spindle moving in three directions, high speed spindle controlle