无绳电话机听筒注塑模具设计.pdfVIP

摘 要 随着信息技术的发展，随着现代工业的发展，塑料在工业中占着越来越重要的地位 ，这导致了模具在工业发展中的地位也越来越高。模具工业作为现在工业发展中的 动 力之一，推动着现代工业技术向前迈进。 随着塑料工业的不断发展，通用塑料以及工程塑料的各种性能如强度和精度发面也 在不断提高，这让塑料制品在工业和生活范围中的应用范围不断在扩大。因此，塑料模 具的制造和设计在工业中的地位也越来越高，而注塑模具是塑料模具中最基本的也是最 常用的模具之一。本文介绍的就是家用无绳固定电话机听筒的注射模具设计过程。 无绳电话机听筒的形状和结构是根据通过分析来确定，听筒的结构和尺寸基本确定 了，就可以通过对听筒总质量以及总体积的分析，合理选择成型设备。通过分析听筒的 形状，确定模具的凸凹模以及型腔型芯形状和结构。模具的成型零部件的尺寸的计算以 及确定也需要通过分析听筒的尺寸来进行确定。根据所选的注射机来设计 注系统，以 及塑件的特点来确定分流道和 口的设计等。所以设计注塑模具首先要做的就是对塑件 进行分析，才能得到将要设计的模具的参数。分析完之后就是对参数的计算，因为模具 零件的设计需要特定的精度，在选取的精度下来计算零件设计的公差。接下来是模具相 关参数的校核，通过校核才能确定所设计的模具是否合格。本文论述的就是整个模具的 设计过程。 关键词：注塑模具；模具结构；成型零部件 Design of MCU Wireless Temperature Acquisition System Student ：Lu ziyuan Teacher: Liu yu Abstract ：With the development of modern industry, plastic occupy more and more important position in the industry, this led to the mold in the status of industrial development is becoming more and more high. As now one of the motive force of industrial development, die and mould industry, promotes the modern industrial technology to move forward. With the continuous development of plastic industry, properties of the general plastics and engineering plastics such as increase in strength and accuracy have been improved, the scope of the application scope of plastics in the industrial and life constantly growing. Therefore, plastic mold manufacturing and design more and more is also high in the position in the industry, the injection mold plastic mold is the most basic is also one of the most commonly used mold. Household cordless fixed telephone is introduced in this paper the receiver of the injection mold design process. The shape and structure of the cordless telephone handset is designed according to the other students to determine the size of the base to provide analysis, the receiver must provide placement hole matched with base. The choice of raw materi