日产300吨矿泉水厂的设计毕业论文.doc

毕 业 论 文（设 计） 日产300吨矿泉水厂的设计 毕业论文（设计）任务书 毕业论文（设计）题目：日产300吨矿泉水厂的设计 毕业论文（设计）的立题依据 天然矿泉水生产是我国软饮料工业中的一个新兴领域，它的兴起缘于人们生活质量提高过程中注重健康需求和环保理念所形成的巨大市场，具有十分广阔的发展前景。主要表现在以下几方面：市场空间大。2具有较好的经济效益。3具有较强的国际市场竞争力。 4社会效益好。5有益于身体健康。 主要内容及要求 本设计为日生产300吨天然矿泉水，对产品方案的制定，工艺流程的设计，车间的平面设计进行了讨论。经过多道程序过滤和杀菌，车间分别采用紫外线和二氧化氯发生器，可同时对瓶装水和桶装水进行杀菌。用AutoCAD制作出车间的工艺流程图和平面布置图；同时对矿泉水加工过程中的物料平衡进行计算，并据此实施设备选型和水电气平衡的估算，最后，进行技术经济分析。 摘 要本设计为日生产300吨天然矿泉水，采用最先进的生产设备，可同时生产550ml瓶装和3.3L桶装的矿泉水生产车间。本文对产品方案的制定，工艺流程的设计，车间的平面设计进行了讨论，利用CAD制作出的工艺流程图和平面布置图；同时对矿泉水加工过程中的物料平衡进行计算，并据此实施设备选型和水电汽平衡的估算。 本设计采用2班制，每天工作16小时，每班工作8小时，共生产550 ml瓶装矿泉水208.56吨，共生产3.3L桶装矿泉水104.17吨；每班每天生产瓶装水104.28吨，生产189600瓶；每班每天生产桶装水52.09吨，生产15784桶。 本设计中，采用活塞泵进行水的输送，经过多道程序过滤和杀菌。车间分别采用紫外线和二氧化氯发生器，可同时对瓶装水和桶装水进行杀菌。同时装置6台无菌贮水罐作为产品灌装前的缓冲装置，然后对两种产品分别进行灌装。  The design of a plant with processing 300 tons mineral water Abstract A plant product 300 tons of natural mineral water per day was designed, it adopt the most advanced equipment, and can produce 550 ml bottled mineral water and 3.3L barreled water workshops at the same time. In this paper, we discussed the program of product development, the design of flow and graphic design of the workshop. We make up the flow chart and graphic design chart with AutoCAD. At the same time during the processing of mineral material balance calculation, and accordingly selection of equipment and utilities to implement a balanced estimation of steam. This design is adopt a 2-shift basis, working 16 hours a day, each work 8 hours. The total production of 550 ml bottled water is 208.56 tons, and the total production of 3.3 L barreled l water is 104.17 tons. Every day each group should product 104.28 tons bottled water, it is 189600 bottles and 52.09 tons barreled water amount 15784 bottles. The piston pumps for water transport are used in this design, through multi-channel filtering and sterilization procedures. By ultraviolet and carbon dioxide workshop, sterilizer of bottled water and barreled water are sterilized.