Rhino单车的建模中文教程.docVIP

单车的建模 Chen Lizra: 建模 渲染 Daniel Ljunggren: 教程撰写 K 翻译整理 这部教程包括了给上面的山地车建模的每一个步骤。当你用Rhinoceros做完这些步骤的时候，你将学会很多在建立详细的模型所必需的建模技巧。为了加快学习的速度，教材中所要用到的曲线都已经包含在the Secrets of Rhinoceros 的CD-ROM里了，还有最后你建立的.3dm文件以及在中间过程中的一些文件。 建议用一天的时间来完成这个教程。 --------------01.mht over----------------- Load the scene ’Curves1.3dm’ from the CD-ROM. This file contains the curves necessary to create the frames of the bike.You will be starting with the back frames of the bike. In the Front viewport,hold down left button mouse and drag a rectangle as shown below. This selects the curves within that area. 从光盘上打开Curves1.3dm的场景，这个文件包含了一些单车中必需的曲线和帧。你将从单车后面的一些帧开始。在主视图中，点击并拖动鼠标左键，像上图一样拉出一个矩形。选中区域中的这些曲线。 To make a surface out of these curves, go to ’Surface/Loft’ in the Menu panel. There are several options to how the surface will be lofted. Use the settings shown below. The ’Closed loft’ box makes the surface go all the way back to the beginning curve, making the surface closed. 要从这些曲线中放样出一个面，在菜单中选择 Surface/loft， 有几个关于平面如何形成的选项。选择下面的设置“Closed loft”选项将使平面回到起始曲线，使平面闭合。 Select the curves shown below, and repeat this step with these curves to loft the second rear frame. 选择下面的曲线，并按照上面的步骤制作后面的帧。 ----------02.mht over--------------- Select the curves shown below, using Shift-LMB (left mouse button) to click for multiple selections. 选择下面的曲线，可以在按往Shift的同时用鼠标左键进行多选。 Then go ‘Surface/Sweep 1 Rail’ in the Menu to see the options. Rhinoceros often selects what curve would be the rail / profile curve, which makes the modeling process very fast. Use the default settings. Repeat this function with the curves shown in the 5 figures below: 然后，到菜单中的‘Surface/Sweep 1 Rail’看一下设置。Rhinoceros 经常会选择rail / profile曲线，这会使建模的过程更快。建议使用默认设置。重复下面五幅图中对曲线的操作。 -----------03.mht over-------------- Without any curves selected, go to ‘Surface/Sweep 1 Rail’. Rhinoceros will ask you to pick the rail curve. Pick it as labeled below. 在不选中任何曲线的情况下，