带肋薄壁方钢管混凝土轴压短柱设计探讨 DESIGN OF CONCRETE-FILLED THIN-WALLED STIFFENED STEEL TUBULAR STUB COLUMNS WITH SQUARE SECTIONS.pdfVIP

带肋薄壁方钢管混凝土轴压短柱设计探讨* 王志滨 陶 忠 (福州大学土木工程学院福州 350002) 摘 要：薄壁方钢管混凝土能取得较好的经济效果，适宜在结构中用作柱构件。但薄壁钢管在荷载较大 时易发生局部屈曲，且降低对混凝土的约束。研究表明，在钢管纵向设置加劲肋可有效延缓管壁局部屈曲， 改善构件工作性能。针对该新型方钢管混凝土轴压短柱，探讨子板件最大宽厚比及加劲肋的最小刚度确定 方法。最后利用国内外常用的钢管混凝土设计规范对已有充分加劲的试验构件进行承载力计算，通过分析 比较确定这些规范计算公式的适用性，供工程实践参考。 关键词：钢管混凝土薄壁纵向加劲肋宽厚比刚度承载力 DESIGNoFCoNCRETE．FILLEDTHIN—WALLEDSTIFFENEDSTEEL TUBULARSTUBCOLUMNSWITH SECTIoNS SQUARE ZhibinTao Wang Zhong ofCivil Fuzhou (College Engineering，FuzhouUniversity 350002) to in Abstract：Concrete—filledthin—walledsteeltubesare moreandmoreattractivebeused square becoming engineering of and is to forthin—walled reasons constructiontime costs．However，localmore occur practice，for saving buckling likely thusdecreasesthelateralCOriftnementontheconcretecore．Inorderto the ofsuchkindof tubes，and improveperformance effectivenessof stiffenersweldedonthesteeltubeshasbeenstudiedinrecent columns，the years， composite longitudinal whichdemonstratesthefactthatthestiffenerscan thetubelocal the of effectivelydelay buckling，andimproveserviceability discussesthe ratioofthe andthe members．This allowedwidth—to-thickness composite paper