链斗输送机装配检验记录 Inspection Report on Complete Machine of Bucket chain conveyor.doc

链斗输送机装配检验记录 chain bucket conveyor Check Record 合 同 号 Contract number 机型 Type User 名称name 检验项目 Testing items 技术要求 Techinal requirements 检验结果 Testing results (允许打“√”或“Х”) (Allow to sign “√”or“Х”) 制作者及交验日期Producers and the date of Producing for examination 头 部 HEAD PART 1、头轴、机壳复验 First axis、machine shell check again 符合装配图要求 Meet the requirements of assembly picture 符合 Eligible 毛国柱 Mao guozhu 2010-4-5 2、头轮齿数、节距 Firs twheel drawingteeth number、knot distance、 符合装配图要求 Meet the requirements of assembly picture Z= 5.5 t=250 3、大链轮齿数、节距 Large sprocke drawi teeth number、knot distance 符合装配图要求 Meet the requirements of assembly picture Drawing No. Z= 52 t=38.1 4、产品标牌 Product label 内容正确,安装牢固 Content correc，Firmly installed 符合 Eligible 5、装配型式 Assembly type 符合生产表要求 Meet the requirements of production table 左(√ ) 右(√ ) Left(√) right(√ ) 6、头轮旋转方向 First wheel rotation direction 符合装配图要求,标识正确Meet the requirements of assembly picture，the mark is right 符合 Eligible 7、头轮中央平面对壳体对称平面对称度 The symmetry between the surface of the first wheel center and the symmetric surface of the shell body ≤1.5mm ≤1.5mm 1.5mm 8、头轮转动灵活性 Flexibility of first wheel rotation 手搬转灵活、无卡阻 hands switch is flexible、without block 符合 Eligible 9、头轮中心高 Height of first wheel 尺寸符合装配图要求且两轴承位等高 Size meets requirements of the assembly picture and the height of the two axis is the same 符合 Eligible 10、头轮及头轴定位可靠性reliability of the first wheeland first axis’s posistion 定位方式符合装配图要求,定位可靠 Type of setting position meets requirements of assembly picture and it is reliable 符合 Eligible 11、头部侧压板与其相配面装配间隙 Space between head side plate and match surface device ≤0.5mm 0.5mm 12、轮、轴、键配合精度、轴密封型式 The cooperation accuracy among wheel、axis、key and type of the asis seal 轮、轴、键配合符合装配图要求;轴密封型式符合装配图要求 The cooperation among wheel、axis and key meets requirements of assembly picture;type of the asis seal meets requirem