无线遥控液压升降平台的设计论文正文.docVIP

毕业设计（论文） 完整设计图纸请联系本人，参见豆丁备注。 中文题目：无线遥控液压升降平台的设计 英文题目：The Design of Wireless Remote Control Hydraulic Lift Platform 学 院： 机械与电子控制工程学院 专 业： 机械工程及自动化 中文摘要 本液压升降平台采用无线遥控，以提高设备操控的自由化和灵活性。其次，本液压升降平台的四个支腿臂的内外伸缩臂设计采用液压缸驱动，提高了平台的工作效率。最后设计过程采用有限元分析的方法，对零部件进行强度校核，优化了零部件的结构。 本设计针对现有的各种液压升平台比较分析，重点是在传统的结构设计的基础上加以有限元分析，通过有限元分析寻找到设计中的薄弱环节，为优化设计提供良好的指引；改进一般液压升降平台的线控方式为无线电遥控方式，无线电遥控采用单路八通道遥控方式；在原有液压升降平台的基础上，改进人工拖动液压升降平台的支撑腿为液压缸驱动。 最后本设计完成了一些部件工程图的绘制和有限元分析后的优化，取得了预想的效果，有较好的市场前景。 关键词： 液压升降平台，无线电遥控，有限元分析，传感器  Abstract The hydraulic lifting platform of a wireless remote control is to enhance the self-control equipment and flexibility. Secondly, the four outrigger arms of the hydraulic lifting platform use the design of the internal and external telescopic boom driven by hydraulic cylinders, saving human resources, improving the efficiency of the platform. Designing process use finite element analysis, to check the strength of parts and components, and to optimize the structure of the parts. This design uses the method of reverse engineering and comparing with the various existing hydraulic platform or, focusing on the traditional design of the structure on the basis finite element analysis, the general improvement of the hydraulic lifting platform for radio-controlled wire way. A radio-controlled remote control one-way four-lane way in the original hydraulic lifting platform on the basis of improving the artificial drag hydraulic lifting platform for the support legs hydraulic cylinder drive. The design has finally finished the engineering drawings of some important parts and optimization conducted by the results of the finite element analysis and achieved the desired effect, which has a bright market prospects. Keywords: hydraulic lifting platform; radio control; finite element analysis; sensors monitor 目 录 中文摘要 I Abstract II 第1章 绪论 1 1.1液压升降平台在机械工业中应用及相关技术概况 1 1.1.1液压升降平台在机械工业中的应用 2 1.1.2有限元分析的发展现状 2 1.1.3 遥控技术的概述