计算机辅助设计及电子束熔融快速成型金属3D打印技术制备个性化股骨假体.docVIP

计算机辅助设计及电子束熔融快速成型金属3D打印技术制备个性化股骨假体 刘宏伟 翁益平 张云坤 徐南伟 童晶 王彩梅 南京医科大学附属常州第二人民医院骨科 河海大学物联网工程学院 北京爱康宜诚股份有限公司 X 关注成功！ 加关注后您将方便地在 我的关注中得到本文献的被引频次变化的通知！ 新浪微博 腾讯微博 人人网 开心网 豆瓣网 网易微博 摘????要： 目的 探讨计算机辅助设计技术联合电子束熔融快速成型(electron beammelting rapid prototyping,EBM-RP)金属3D打印技术制备个性化股骨假体的可行性。方法 采用64层螺旋CT对1具成年男性左侧股骨标本进行扫描,将获得的断层图像数据导入Mimics15.0软件重建股骨三维模型,再应用UG 8.0软件设计个性化股骨假体三维模型;最后导入EBM-RP金属3D打印机打印个性化袖套。结果 根据个体化股骨假体三维模型,采用EBM-RP金属3D打印技术成功制备个性化袖套,与SR股骨柄体组配,制成个性化股骨假体。结论 通过薄层CT扫描及计算机辅助设计技术可设计与干骺端良好匹配的个性化股骨假体;采用EBM-RP金属3D打印技术可打印具有复杂三维形态、表面微孔、与干骺端髓腔匹配的钛合金个性化股骨假体,该技术具有简便、快速、准确的优点。 关键词： 个性化股骨假体; 电子束熔融快速成型; 3D打印; 计算机辅助设计; 作者简介：翁益平,副主任医师,研究方向:骨科基础及临床转化、人工关节,E-mail:383239001@ 收稿日期：2015-05-01 基金：江苏省三维打印装备与制造重点实验室开放课题资助项目(BM2013006) COMPUTER ASSISTED DESIGN AND ELECTRON BEAMMELTING RAPID PROTOTYPING METAL THREE-DIMENSIONAL PRINTING TECHNOLOGY FOR PREPARATION OF INDIVIDUALIZED FEMORAL PROSTHESIS LIU Hongwei WENG Yiping ZHANG Yunkun XU Nanwei TONG Jing WANG Caimei Department of Orthopaedics, Changzhou No.2 Peoples Hospital of Nanjing Medical University; College of Internet of h ings Engineering, Hehai University; Beijing AI-Kang Yicheng Limited Company; Abstract： Objective To study the feasibility of preparation of the individualized femoral prosthesis through computer assisted design and electron beammelting rapid prototyping(EBM-RP) metal three-dimensional(3D) printing technology. Methods One adult male left femur specimen was used for scanning with 64-slice spiral CT; tomographic image data were imported into Mimics15.0 software to reconstruct femoral 3D model, then the 3D model of individualized femoral prosthesis was designed through UG8.0 software. Finally the 3D model data were imported into EBM-RP metal 3D printer to print the individualized sleeve. Results According to the 3D model of individualized prosthesis, customized sleeve was successfully prepared through the EBM-RP metal 3D printing technology, assembled with the standard handle component of SR modular femoral prosthes