CME简单配置2.doc

FAX问题解析 问题 voice的dial-peer默认是729，对于G.729在出去时有压缩，但不适用压缩的东东：文字，卡号，DTMF，那么如何解决产生的故障 sh dial-peer voice VoiceEncapPeer1002 peer type = voice, information type = voice, description = `, tag = 1002, destination-pattern = `1002, answer-address = `, preference=0, CLID Restriction = None CLID Network Number = ` CLID Second Number sent CLID Override RDNIS = disabled, source carrier-id = `, target carrier-id = `, source trunk-group-label = `, target trunk-group-label = `, numbering Type = `unknown group = 1002, Admin state is up, Operation state is up, Outbound state is up, incoming called-number = `, connections/maximum = 0/unlimited, DTMF Relay = disabled, URI classes: Destination = huntstop = disabled, in bound application associated: DEFAULT out bound application associated: dnis-map = permission :both incoming COR list:maximum capability outgoing COR list:minimum requirement Translation profile (Incoming): Translation profile (Outgoing): incoming call blocking: translation-profile = ` disconnect-cause = `no-service advertise 0x40 capacity_update_timer 25 addrFamily 4 oldAddrFamily 4 type = pots, prefix = `, forward-digits default session-target = `, voice-port = `1/0/1, direct-inward-dial = disabled, digit_strip = enabled, register E.164 number with H323 GK and/or SIP Registrar = TRUE fax rate = system, payload size = 20 bytes supported-language = Time elapsed since last clearing of voice call statistics never Connect Time = 0, Charged Units = 0, Successful Calls = 0, Failed Calls = 1, Incomplete Calls = 0 Accepted Calls = 0, Refused Calls = 0, Last Disconnect Cause is 0 , Last Disconnect Text is , Last