MP-8813B 广播分区器中英文说明书 - 复制.docVIP

MP-8813B Indirect Speaker Selector OWNER’S MANUAL Before operating, please read this manual completely. FEATURES 2CH inputs, 10CH outputs. Hi/Low alarm level available. The channel will be switched to input B automatically while alarming. Alarm indicator and output indicator. Left blank for memo FRONT PANEL REAR PANEL CONNECTIONS *ALARM IN to be connected to fire center 1~10 Live Terminals of CH1~CH10 respectively 11~25 COM OPERATION Make BGM signal input from A terminal while EMC signal input from B terminal on the rear panel. We also can make A, B together with short circuit if there is none of appropriative EMC amplifier. Pin 1 ~ 10 of ?ALARM IN?port are live terminals of CH1～CH10 respectively while pin 11～25 are com. +5 ~ 24V / 0V level of alarm signal is available. If ACTIVE LEVEL set at High, positive signal is valid; while set at Low, 0V (grounded) signal is valid. Every channel will be switched to B while alarm signal is fed to ALARM IN, and the switch indicator will be flashed quickly. Click any Switching key to switch channels which you want. An grounded Alarm signal will be sent out from揂LARM OUT?dwhile any alarm signal appears on?ALARM INPUT?. SPECIFICATIONS Channels 10, switchable Input capacity 70 ~ 100 V ，10 A output capacity 70 ~ 100 V ，5 A / CH ALM 10 CHs; +5~+24 V/ 0 according to presetting Protection AC fuse ×1 Power Requirement AC 220 –240 V / 50～60 Hz Dimensions 485×88×375 mm Gross weight 6.5 kg Net weight 5.2 kg Specifications are subject to be changed without notice. CAUTION When the “Power switcher”is off, please pull out the power cord from the socket. Please keep the equipment out of water. To reduce the risk of electric shock, do not remove the cover. ● No user parts inside. Refer servicing to qualified service personnel. DSPPA ACOUSTIC TECHNOLOGY CO. LTD. MP-8813B 广播分区器 使用说明 欢迎惠顾。您对本产品之选用显示了您的专业眼光。使用