7m大采高综采液压支架设计和配套.pdf

学兔兔 第18卷第1期 (总第110期) 煤 矿 开 采 Vo1．18No．1(Series No．110) 2013年2月 Coal mining Technology February 2013 7 m大采高综采液压支架设计及配套 程 骏 ，张严敬 ，荣和芳 (1．天地科技股份有限公司开采设计事业部，北京100013；2．枣庄煤矿第二机械厂，山东枣庄277524； 3．大同煤矿集团机电装备制造有限公司山西大同037003) [摘 要] 通过对陕煤集团红柳林煤矿地质条件的分析，采用经验估算、基于顶板分类、数值 模拟等方法确定支架的支护强度，并提出中部支架与端头支架大梯度过渡的配套方式。现场使用结果 表明，该支架的支护强度能够满足矿压要求，大梯度过渡的配套方式能够改善液压支架受力状态，减 少工作面上下两端部过渡段顶部三角煤损失，提高资源的采出率。 [关键词] 液压支架；支护强度；数值模拟；大梯度过渡；采出率 [中图分类号]TD355．41 [文献标识码]A [文章编号]1006-6225(2013)01-0025—03 Design of Powered Support and Equipments Matching for 7m Mining Height CHENG Jun 。ZHANG Yan-jin ．R0NG He．fang (1．Tiandi Science＆Technology Co．，Ltd，Beijing 100013，China；2．Zhanzhuang 2 Machinery Works，Zhaozhuang277524，China； 3．Mechanical and Electrical Equipment Manufacturing Co．，Ltd．，Datong Coal Mine Group，Datong 037003，China) Abstract：By analyzing geological condition of Hongliulin Colliery of Shanmei Group，this paper obtained supporting intensity of pow- ered support on the basis of experience estimation，roof classification and numerical simulation and put forward large gradient transient match manner of mid—powered supports and end—support．Application showed that the supporting intensity could bear underground pres— sure，and that large gradient transient match manner could improve stress state of powered support，reduce roof triangular coal loss over support at the ends of face，and increase resource recovery． Keywords：powered support；supporting intensity；numerical simulation；large gradient transition；mining ratio 目前，高工作阻力与高可靠性掩护式液压支架 P=8rh=8×24×10。×7．0=1．344(MPa) 日益普及，澳大利亚、南非等一些传统上主要采用 式中，r为顶板岩层容重，24k