基于分布式偏差的加热炉支路温度一致控制-化工学报.PDFVIP

第67 卷 第12 期 化 工 学 报 Vol.67 No.12 December 2016 2016 年12 月 CIESC Journal ·5148 · DOI ：10.11949/j.issn.0438-1157 基于分布式偏差的加热炉支路温度一致控制 闵鸯，栾小丽，刘飞 （江南大学轻工过程先进控制教育部重点实验室，江苏无锡 214122 ） 摘要：针对现有集中式温度支路平衡控制存在的问题，提出基于分布式偏差的支路温度一致性控制方案：仅利用 相邻支路的温度信息，将各支路与相邻支路的温度偏差作为控制输入，使加热炉所有支路的温度达到一致的同时， 确保调节过程中总进料流量不变。由于仅利用了相邻支路的温度信息，使得所提分布式偏差控制方案在大规模支 路情形下更显优势。最后仿真实例表明了该分布式控制方案的有效性与可行性。 关键词：平衡；分布式偏差；一致控制；状态方程；动态仿真 中图分类号：TQ 028.8 文献标志码：A 文章编号：0438—1157 （2016 ）12—5148—07 Uniform temperature control on feed heaters by distributed deviations MIN Yang, LUAN Xiaoli, LIU Fei (Key Laboratory of Advanced Control for Light Industry Processes, Ministry of Education, Jiangnan University, Wuxi 214122, Jiangsu, China) Abstract: A novel design method was proposed on the basis of distributed deviation for consensus pass temperature control on industrial feed heaters, in order to overcome limitations of centralized balance control schemes on pass temperatures. In the method, only temperature deviations of adjacent passes were used as input in control algorithm to achieve uniform temperature across all passes while maintaining constant total feed flow. Compared to the traditional centralized balance control, this distributed deviation control scheme by using only temperature information of adjacent passes was more cost effective especiall