免拆卸水泥复合模板-结构混凝土柱轴心受压性能研究.pdfVIP

学兔兔 2011年第l0期 混凝 土与水 泥制品 2011 No10 10月 CHINA CONCRETE AND CEMENT PR0DUCTS October 免拆卸水泥复合模板一结构混凝土柱的 轴心受压性能研究 周双喜，刘 杰 (华东交通大学土木建筑学院，南昌330013) 摘 要：通过对二根柱试件(一根免拆卸模板混凝土柱，一根普通混凝土柱)的试验，研究了免拆卸模板混凝土 柱在单调荷载作用下的基本力学性能，包括破坏形态、极限承栽力、柱侧混凝土应变、受力钢筋应变等，对免拆卸模 板一结构混凝土柱与普通混凝土柱的受力性能进行了对比。实验结果表明：采用现行规范计算免拆卸模板一结构混 凝土柱的极限承载力具有较高的安全性能；免拆卸模板一结构混凝土柱具有与普通混凝土柱相近的轴心受压性能。 关键词：免拆卸模板混凝土柱；轴心受压性能；裂缝 Abstract：Based on the experiment on two COlumn specimens fone is a concrete column wit}l a formwork without disassembly，another is an ordinary concrete column)，the basic mechanical properties of the concrete column with a formwork without disassembly under monotonic loading are studied，including failure patterns，ultimate bearing capacity， concrete strain，strain of reinforcing steel and SO on．The comparison of mechanical behavior is made between the concrete structure column with a formwork without disassembly and an ordinary concrete column．The experimental results indicate that the ultimate bearing capacity of the concrete structure column with a formwork without disassembly has safer performance while using the current specification to calculate it，and its axial compression capacity is approximate to the one of an ordinary concrete column． Key words：Concrete column with a form work without disassembly；Axial compression capacity；Cracks 中图分类号：TU375．3 文献标识码：A 文章编号：1000—4637(2011)1O—48一o3 0 前言 的保护层。当结构混凝土达到拆模龄期，仅需拆除 混凝土的可塑性，引入了模板工程在钢筋混凝