.焊接程序试验.pdfVIP

INTERNATIONAL ISO STANDARD 15614-7 First edition 2007-06-15 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding Descriptif et qualification dun mode opératoire de soudage pour les matériaux métalliques — Épreuve de qualification dun mode opératoire de soudage — Partie 7: Rechargement par soudage Reference number ISO 15614-7:2007(E) © ISO 2007 ISO 15614-7:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2007 All rights reserved . Unless otherwise specified, no