矩阵按键程序.docVIP

矩阵按键程序 矩阵按键数码管显示程序，仿真成功，实物不成功 #includereg52.h #includeintrins.h #define uint unsigned int #define uchar unsigned char uchar code table[] ={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71 }; uint temp; uint num; uint duan; sbit OE=P1^1; sbit ST_CP=P1^7; sbit SH_CP=P1^6; sbit DS=P1^5; void delay( uint z); void display(); void keyscan(); void main() //主函数 { while(1) { keyscan(); } } void display() { uint wei=0x00,j,i; OE=1; for(j=0;j8;j++) //输入段选 { SH_CP=0; DS=duan0x80; SH_CP=1; duan=_crol_(duan,1); SH_CP=0; } OE=0; OE=1; for(i=0;i8;i++) //输入位选 { SH_CP=0; DS=wei0x80; SH_CP=1; wei=_crol_(wei,1); SH_CP=0; } OE=0; //输出显示数据 ST_CP=0; ST_CP=1; delay(100); ST_CP=0; OE=0; } void delay( uint z) { uint x,y; for(x=z;x0;x--) for(y=110;y0;y--); } void keyscan() { { P3=0xfe; temp=P3; temp=temp0xf0; if(temp!=0xf0) { delay(50); temp=P3; temp=0xf0; if(temp!=0xf0) { temp=P3; temp=0xf0; switch(temp) { case 0xe0:num=0;break; case 0xd0:num=1;break; case 0xb0:num=2;break; case 0x70:num=3;break; } while(temp!=0xf0) { temp=P3; temp=temp0xf0; } duan=table[num]; display(); } } }