模具设计 矩形浇口设计.pptVIP

矩形邊緣澆口設計 Rectangular Edge Gate Design L = 0.5 ~ 0.75 mm W = 澆口寬度 ( mm ) gate width in mm A = 型腔表面積 ( mm2 ) surface area of cavity in mm2 n = 材料常數 material constant 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC h = n t h = 澆口厚度( gate thick. in mm ) t = 零件壁厚( wall thick. in mm ) W t L h 扇形澆口設計 Fan Gate Design L= 1.3mm W= w= 澆口寬度 [mm] gate width in mm A= 型腔表面積 [ mm2 ] surface area of cavity in mm2 n= 材料常數[ material constant ] 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC 澆口厚度[ gate thick. in mm] t= 零件壁厚[ wall thick. in mm ] h1 = n t h2 = wh1/D 重疊式澆口設計 Overlap Gate Design W= w= 澆口寬度 [mm] gate width in mm A= 型腔表面積 [ mm2 ] surface area of cavity in mm2 n= 材料常數[ material constant ] 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC 澆口厚度[ gate thick. in mm] = nt 澆口長度[ land length in mm ] t= 零件壁厚[ wall thick. in mm ] L1 = 0.5~0.75 L2 = h+( w/2 ) 凸耳澆口設計 Tab Gate Design L= 0.5~0.75mm W= w= 澆口寬度 [mm] gate width in mm A= 型腔表面積 [ mm2 ] surface area of cavity in mm2 n= 材料常數[ material constant ] 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC 澆口厚度[ gate thick. in mm] t= 零件壁厚[ wall thick. in mm ] h1 = n t h2 = 0.9 t 針點澆口設計 Pin Gate Design L = 0.5 ~ 0.75 mm d = 澆口直徑( mm ) gate diameter in mm t = 零件壁厚( mm ) wall thick. in mm A = 型腔表面積 ( mm2 ) surface area of cavity in mm2 n = 材料常數 material constant 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC d L t 潛伏式澆口設計 Subgate Design W= w= 澆口寬度 [mm] gate width in mm A= 型腔表面積 [ mm2 ] surface area of cavity in mm2 n= 材料常數[ material constant ] 0.6 for PE, PS 0.7 for