Concrete Stamping and Stenciling Systems：具体的冲压和制版系统.doc

Legacy Decorative Concrete Systems, Inc. July 2007 3421 Lumber Lane Springfield, Illinois 62707 Toll Free (866) 684-9394 Phone (217) 522-6737 Fax (866) 684-9395 Website E-mail technicalsupport@ Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource Manual—CSI Manual of Practice, Fifth Edition. The section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section. Section numbers are from MasterFormat 1995 Edition, with numbers from MasterFormat 2004 Edition in parentheses. Delete version not required. SECTION 03360 (03 35 33) CONCRETE [STAMPING] [STENCILING] SYSTEM Specifier Notes: This section covers Legacy? Decorative Concrete Systems, Inc. “Impressions?” concrete stamping system and “FauxCrete?” concrete stenciling system. Both systems create colors and patterns into freshly placed horizontal concrete surfaces. Consult Legacy Decorative Concrete Systems, Inc. for assistance in editing this section for the specific application. Use section number 03360 (03 35 33) when specifying “Impressions” concrete stamping system. Use section number 03360 (03 35 36) when specifying “FauxCrete” concrete stenciling system. PART 1 GENERAL 1.1 SECTION INCLUDES Specifier Notes: Throughout this product guide specification, use “concrete stamping system” when specifying “Impressions” and use “concrete stenciling system” when specifying “FauxCrete”. Specify one of the following decorative concrete systems. A. Decorative concrete stamping system. B. Decorative concrete stenciling system. 1.2 RELATED SECTIONS Specifier Notes: Edit the following list of related sections as required for t