基于氮化铝的OPGW交流融冰效率的研究.pdfVIP

Transmission and Distribution Engineering and Technology 输配电工程与技术, 2014, 3, 53-61 Published Online September 2014 in Hans. /journal/tdet /10.12677/tdet.2014.33008 Research on Ice-Melting Efficiency of OPGW with Aluminum Nitride Peiwei Huang1,2, Yinshun Wang1,2, Huanhui Guo1,2, Peng Ju1,2, Jinya Miao1,2, Changjun Liu1,2, Yang Li1,2 1 State Key Laboratory for Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 2 Beijing Key Laboratory of High Voltage and Electromagnetic Compatibility, North China Electric Power University, Beijing Email: hpw1000@ th th th Received: Aug. 28 , 2014; revised: Sep. 5 , 2014; accepted: Sep. 12 , 2014 Copyright © 2014 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract Ice accident on transmission lines influences the safe operation of power grid. Preventing ice dis- aster is one of the key technologies for the construction of power network. Ground wire ice-melt- ing technology is of great significance in conventional technology. Based on the layer stranded structure of Optical Fiber Composite Overhead Ground Wire (OPGW), a twisted bifilar wire fabri- cated by insulated wire is used as a heater for AC de-icing of ground wire. In order to enhance the heat transfer rate and shorten the ice-melting time as well as reduce the heat loss and improve ice melting efficiency, aluminum nitride, a semiconductor with high thermal conductivity, is used to fill in the gap among the conductor. An equivalent thermal circuit is established to calculate the de-icing