吊舱推进器静态试验研究 Experiments with Podded Propulsors in Static Azimuthing Conditions.pdf

Experiments with Podded Propulsors in Static Azimuthing Conditions 1 1 2 3 2 Islam M. F , Veitch B , Akinturk A , Bose N and Liu P 1Faculty of Engineering and Applied Science, Memorial University of Newfoundland St. John’s, NL, A1B 3X5, Canada 2Institute for Ocean Technology, National Research Council Canada St. John’s, NL, A1B 3T5, Canada 3 Australian Maritime Hydrodynamics Research Centre, Australian Maritime College, Launceston, TAS 7250, Australia Email: Mohammed.Islam@nrc-cnrc.gc.ca azimuth angles. The tests measured the axial and ABSTRACT transverse loads and used traditional non-dimensional The paper presents a comprehensive experimental coefficients to analyze the data. The study was study of the variations of propulsive characteristics of limited to ±15° azimuth angles. In the work, the puller and pusher podded propulsors in static effect of an azimuth angle on propeller torque was azimuthing open water conditions. A custom not studied. Grygorowicz and Szantyr [16] presented designed six-component global dynamometer and a open-water measurements of podded propulsors both three-component pod dynamometer were used to in puller and pusher configurations in a circulating measur