CSA网卡驱动程序分析.docVIP

CS8900A网卡驱动程序分析 lichao-runing@163.com /* CS8900a.h */ #define CONFIG_CERF_CS8900A 1 /* * cs8900a.c: A Crystal Semiconductor (Now Cirrus Logic) CS8900A driver for SMDK-s3c2410 (based on cs89x0.c) * * Author: Yong-iL Joh tolkien@ * Date : $Date: 2002/10/16 09:08:07 $ * * $Revision: $ Wed Aug 14 2002 Yong-iL Joh tolkien@ - initial, based on cs89x0.c Wed Aug 16 2002 Yong-iL Joh tolkien@ - working! * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. */ #include linux/config.h #include linux/kernel.h #include linux/module.h #include linux/init.h #include linux/slab.h #include linux/errno.h #include linux/spinlock.h #include linux/ioport.h #include linux/netdevice.h #include linux/etherdevice.h #include linux/skbuff.h #include asm/io.h #include asm/irq.h #include asm/hardware.h  lichao-runing@163.com #define IRQ_LAN IRQ_CS8900 /* 宏IRQ_LAN 定.网卡的中.. 宏IRQ_CS8900 在include/asm-arm/arch-arm/smdk.h 中定. #define IRQ_CS8900 IRQ_EINT9 宏IRQ_EINT9 定.位于include/asm-arm/arch/irqs.h 中 #define IRQ_EINT9 (5 +NORMAL_IRQ_OFFSET) #define NORMAL_IRQ_OFFSET 32 所以网卡的中...37。 */ #include cs89x0.h /* * Set this to zero to remove all the debug statements via * dead code elimination */ #undef DEBUGGING 4 #if DEBUGGING #define DPRINTK(n, args...) \ if (n = DEBUGGING) { \ printk(args); \ } #else #define DPRINTK(n, args...) #endif #if DEBUGGING static char version[] __initdata = cs89x0.c: v2.4.3-pre1 Russell Nelson nelson@, Andrew Morton andrewm@.au\n; #endif /* First, a few definitions that the brave might change. A zero-terminated list of I/O addresses to be probed. Some special flags.. Addr 1 = Read back the address port, look for signature and reset the page window before probing Addr 3 = Reset the page window and probe The CLPS eval board has the Cirrus chip at 0 in ARM IO space, but it is possible th