Quick start v3.1HUARAIN -FL01-03指纹锁快速入门英文说明书.doc

A HuaRain Fingerprint Door Lock Use Fingerprints-Register, Delete, Clear Fingerprints Register your fingerprints Press button，hear a beep. Press button , hear another beep. Put your finger onto the Fingerprint Sensor until the Status LED turn green while hearing a beep and do not move your finger until the Status LED turn green again with a long beep. The fingerprint is registered. *the first three fingerprints registered will be administrators. Delete the fingerprints *Only administrators have rights to delete the fingerprints. *Authority level: first administratorsecond administratorthird administrator Press button , hear a beep, Press button , hear another beep. Then the fingerprints can be deleted after an administrator puts his finger onto the Finerprint Sensor until two long beeps heard. Clear fingerprints Press button ,hear a beep, Press both and the Function Key for 3 seconds until the beep sounds, Input Factory-default Password, All the fingerprints will be cleared when a long beep heard. Use Password -Set, Clear Set password Press with a beep , Press the Function Key with another beep. The first administrator put the finger onto the Fingerprint Sensor till the Status LED turn green with a beep. Input 8 digits as User Password.(The beep will sound once the password is input legally.) *Six groups of User Password can be stored. Clear password Press with a beep, Press the Function Key for 5 seconds till the beep sounds. The first administrator put the finger onto the Fingerprint Sensor till the beep sounds. Approaches to Unlock by fingerprint Press with a beep, Then put the finger onto the Fingerprint Sensor until the Status LED turn green with a beep, Turn the handle to open the door. *Please keep your fingers clean. Microchip will close down automatically if there is any water droplet, oil and dirt on the Fingerprint Sensor. Clean it with a piece of soft cloth. by password Press with a beep, Then input a set of password( 8 digit