广西某低品位复杂铜锌多金属矿选矿试验.pdfVIP

第 36卷第4 期 矿 冶 工 程 V〇1.36 ^ 4 2016 年 08 月 MINING AND METALLURGICALENGINEERING August 2016 广 西 某 低 品 位 复 杂 铜 锌 多 金 属 矿 选 矿 试 验 ® 阙绍娟 (广西冶金研究院有限公司，广 西 南 宁 530023) 摘 要 ：针对广西某低品位复杂铜锌多金属矿进行了选矿试验研究，在磨矿细度-74 pm粒级占85%的情况下，通过一粗三扫四精 优先选铜、选铜尾矿一粗两扫三精选锌、选锌尾矿一粗两扫两精选硫砷、硫砷混合精矿一粗两扫两精再分离、中矿顺序返回的闭路 试验流程，获得铜精矿铜品位16.29%、铜回收率51.48%，锌精矿锌品位45.61%、锌回收率72.15%，硫精矿硫品位36.35%、砷品位 0.67%、硫回收率46.09%，砷精矿砷品位31.54%、砷回收率75.10%，综合回收了矿石中的有价元素。 关键词：铜锌多金属矿；综合回收；浮选；回收率；铜精矿；硫精矿；砷精矿 中图分类号：TD923 文献标识码：A doi :10.3969/j .issn .0253-6099.2016.04.012 文章编号：0253-6099(2016)04-0045-4 Beneficiation Tests of Low-grade and Complex Copper-Zinc Polymetallic Ore in Guangxi QUE Shao-juan ( Guangxi Metallurgical Research Institute Co Ltd， Nanning 530023，Guangxi ，China ) Abstract ： Beneficiation tests ol a low-grade and complex copper-zinc polymetallic ore in Guangxi were carried out . After grinded to a fineness ol -74 ^m 85% ， the ore was processed with a closed-circuit flowsheet including a Cu-preferential flotation with one roughing， three stages ol scavenging and four stages ol cleaning， a zinc flotation for copper tailings with one roughing， two stages of scavenging and three stages of cleaning， a sulfur-arsenic flotation for zinc tailings with one roughing， two stages of scavenging and two stages of cleaning， and a separation of sulfur-arsenic bulk concentrate with one roughing， two stages of cleaning and two stages of scavenging， while the middlings were returned sequentially back to the previous stage . As a result， a copper concentrate grading 16.29% at 51.48% recovery， a zinc concentrate grading 45.61% at 72.1