469操作指南.docVIP

469操作指南 菜单结构 SETPOINT S1 469 SETUP 装置设置 PASS CORD 密码 PREFERENCE 液晶屏幕显示设置 COMMUNICATIONS 通讯设置 REAL TIME CLOCK 时钟设置 DEFAUT MESSAGES 默认显示信息 MESSAGE SCRACHPAD 屏幕文字显示 CLEAR DATA 清除数据 INSTALLATION 是否清除历史数据 S2 SYSTEM SETUP CURRENT SENSING CT变比 VOLTAGE SENSING PT变比 POWER SYSTEM 频率及相序 SERIAL COMM. CONTROL REDUCED VOLTAGE STARTING S3 DIGITAL INPUTS STARTER STATUS ASSIGNABLE INPUT 1 ASSIGNABLE INPUT 2 ASSIGNABLE INPUT 3 ASSIGNABLE INPUT 4 S4 OUTPUT RELAYS RELAY RESET MODE FORCE OUTPUT RELAYS S5 THERMAL MODEL 反时限过负荷 THERMAL MODEL 保护定值： 启动电流 OVERLOAD PICKUP LEVEL: 1.25*FLA 反时限特性 SELECT CURVE STYLE: STANDARD 选择曲线 STANDARD OVERLOAD CURVE NUMBER:2 OVERLOAD CURVE SETUP S6 CURRRNT ELEM SHORT CIRCUIT TRIP 速断 保护定值： 动作电流 SHORT CIRCUIT TRIP PICKUP: 5.8*CT 动作时间 INTENTIONAL S/C TRIP DELAY: 0ms OVERLOAD ALARM 过负荷告警 保护定值： 动作时间 OVERLOAD ALARM DELAY: 20S MECHANICAL JAM 过流 保护定值： 动作电流 MECHANICAL JAM PICKUP: 2.5*FLA 动作时间 MECHANICAL JAM DELAY: 20S UNDERCURRNT CURRENT UNBALANCE GROUND FAULT 接地故障 保护定值： 动作电流 GROUND FAULT PICKUP: 0.25A 动作时间 GROUND FAULT DELAY: 1S PHASE DIFFERENTIAL S7 MOTOR STARTING ACCELERATION TIME 启动时间跳闸 保护定值： 动作时间 ACCELERATION TIME FROM START:30S START INHIBIT JOGGING BLOCK RESTART BLOCK S8 RTD TEMPERATURE RTD TYPES RTD #1 ( RTD #12 OPEN RTD SENSOR RTD SHORT/LOW TEMP S9 VOLTAGE ELEM. UNDERVOLTAGE 低电压 保护定值： 动作电压 UNDERVOLTAGE TRIP PICKUP:0.65*RATED 动作时间 UNDERVOLTAGE TRIP DELAY: 0.5S OVERVOLTAGE 过电压 保护定值： 动作电压 OVERVOLTAGE TRIP PICKUP:1.2*RATED 动作时间 OVERVOLTAGE TRIP DELAY: 20S PHASE REVERSAL