1镁合金表面处理技术的发展现状_王梅.docx

Development Status of magnesium alloy surface treatment technologyWang Mei, Liu Jianrui, Chenshu Juan, Huang Weidong(State Key Laboratory of Solidification Technology, Northwestern Polytechnical University, Xian 710072, China)Abstract: This paper introduces the principle of several common chemical conversion of magnesium alloy, anodizing, oxidation, organic coatings, metal coatings and other treatment methods, and the resulting characteristicsStructure and corrosion resistance of the film and the like. Analysis of the future direction of the magnesium alloysurfacetreatment technologies.Keywords: magnesium alloy; surface treatment; corrosion resistanceCLC: TG146 .2 +1 Document code: A Article ID: 1000-8365 (2006) 03-0295-04表面处理技术的发展镁合金王玫，刘建蕊，沉树娟，黄卫东（索尔idification处理国家重点实验室，西北工业大学，西安710072，中国）摘要：回顾上形成PR inciple发，特点，结构和腐蚀镁合金表面薄膜耐性能由几个表面处理达到的方法，如化学转化，阳极氧化，微弧氧化，有机化合物表面处理技术的涂层和金属coating.The发展趋势镁合金进行了展望的未来。关键词：Magnesiumalloys;表面处理;耐腐蚀Abstract: A review is made on the formation pr inciple, characteristics, microstructure and corrosionresistant performance of surface films of magnesium alloys attained by several surface treatmentmethods, such as chemical conversion, anodic oxidation, micro-arc oxidation, organic compoundcoating and metal coating.The development tendency of the surface treatment technology formagnesium alloys is also prospected in the future.Key words: Magnesiumalloys; Surface treatment; Corrosion resistanceMagnesium is one of the lightest metal structural material, density only1 .74g / cm3, a specific strength and specific stiffness are high, and further having a cuttingWorkability and electromagnetic shielding is good, high recovery rate [1], is widely usedIn many areas of automotive, aerospace and electronic products. magnesiumAlloy is becoming the third largest metal construction materials steel, aluminum after,Known as the 21st century green engineering material.But the chemical properties of magnesium is very lively, easily with oxygen, nitrogen,Water, C