MMA7361的c程序.doc

//名称：单片机串口输出MMA7361角度值 //使用单片机：stc12c5a60s2 //晶振：11.0592m //X轴-(ADC0)P1.0 //Y轴-(ADC1)P1.1 //Z轴-(ADC1)P1.2 //用pc串口助手显示时，选择字符显示 //参考宏晶网址例程 #include reg51.h #include intrins.h #include math.h //Keil library #include stdio.h //Keil library //#define FOSC #define FOSC //晶振11.0592M #define BAUD 9600 typedef unsigned char BYTE; typedef unsigned int WORD; #define uchar unsigned char #define uint unsigned int /*Declare SFR associated with the ADC */ sfr AUXR1 = 0XA2; sfr ADC_CONTR = 0xBC; //ADC control register sfr ADC_RES = 0xBD; //ADC high 8-bit result register sfr ADC_RESL = 0xBE; sfr ADC_LOW2 = 0xBE; //ADC low 2-bit result register sfr P1ASF = 0x9D; //P1 secondary function control register /*Define ADC operation const for ADC_CONTR*/ #define ADC_POWER 0x80 //ADC power control bit #define ADC_FLAG 0x10 //ADC complete flag #define ADC_START 0x08 //ADC start control bit #define ADC_SPEEDLL 0x00 //420 clocks #define ADC_SPEEDL 0x20 //280 clocks #define ADC_SPEEDH 0x40 //140 clocks #define ADC_SPEEDHH 0x60 //70 clocks void InitUart(); void InitADC(); void SendData(BYTE dat); int GetADCResult(BYTE ch); void Delay(WORD n); uchar ge,shi,bai,qian,wan; //显示变量 void conversion(uint temp_data) { wan=temp_data/10000+0x30 ; temp_data=temp_data%10000; //取余运算 qian=temp_data/1000+0x30 ; temp_data=temp_data%1000; //取余运算 bai=temp_data/100+0x30 ; temp_data=temp_data%100; //取余运算 shi=temp_data/10+0x30 ; temp_data=temp_data%10; //取余运算 ge=temp_data+0x30; } /*---------------------------- Get ADC result ----------------------------*/ int GetADCResult(BYTE ch) { int AD10bitResult; ADC_CONTR = ADC_POWER | ADC_SPEEDLL | ch | ADC_START; _nop_(); //Must wait before inquiry _nop_(); _nop_();