300WLED英文说明书A6版面PRQLIGHT.doc

Specification:Power Input: 100V~240V,50~60Hz Power: 300W Mode: strobe 3000 Lamps: 832pcs 0.3W?.4W .White LEDs .Size: 420*240*140 Weight: 5.5KG Remark: errors and omissions for every information given in this manual excepted. All information is subject to change without prior notice. Strobe 3000 USER MANUAL KEEP THIS MANUAL FOR FUTURE NEEDS Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction Strictly. Every person involved with the installation, operation and maintenance of this device has to: -be qualified -follow carefully the instructions of this manual INTRODUCTION: Thank you for having chosen this professional LED Strobe Light. You will see you have acquired a powerful and versatile device. Please check carefully that there is no damage caused by transportation. Should there be any, consult your dealer and don’t install this device. Features: ?Voltage: 100~240V, 50Hz~60Hz ? Lamp: 832pcs 0.3W?.4W0 White LEDs.  In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights.1) Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of dust. Clean the fan each week. A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are in good condition, prevent the poor contact of circuit from overheating. Troubleshooting： A. Lights can’t work,no lights out 1. Check power connection。The fuse whether ok 2. Check power input whether correct B. Can’t DMX control 1. DMX signal indicator must be on,if not,check the DMX ca