关于质心提取的若干图像处理问题的总结.docVIP

关于质心提取的若干图像处理问题的总结 1.提取多个目标物的质心位置 I = imread(test.png);%加载图图像 I1 = im2bw(I); L = bwlabel(I1);%将I1转换为标记矩阵 stats = regionprops(L, Centroid);%求质心 imshow(I) hold on; for i = 1 : length(stats) temp = stats(i).Centroid; plot(temp(1), temp(2), r.); end 2提取一个车轮的中心 clear all;clc rgb = imread(wheel.jpg); I=rgb2gray(rgb); Ibw=im2bw(I); Ibw=imclearborder(Ibw); Ibw=bwmorph(Ibw,close,2); Ibw=imfill(Ibw,holes); Ibw=bwmorph(Ibw,open,2); imshow(rgb) [l,m]=bwlabel(Ibw,8); stats=regionprops(l,Centroid); hold on; plot(stats(1).Centroid(1),stats(1).Centroid(2),R+); hold off 3提取两个车轮的中心，并计算他们之间的距离 clear all; close all clc rgb = imread(wheel1.jpg); I=rgb2gray(rgb); Ibw=im2bw(I); Ibw=imclearborder(Ibw); Ibw=bwmorph(Ibw,close,2); Ibw=imfill(Ibw,holes); Ibw=bwareaopen(Ibw,500); imshow(rgb,notruesize) %figure,imshow(Ibw); [l,m]=bwlabel(Ibw,8); hold on; for i=1:m stats=regionprops(l,Centroid); plot(stats(i).Centroid(1),stats(i).Centroid(2),R+); end a=stats(1).Centroid(1); b=stats(1).Centroid(2); c=stats(2).Centroid(1); d=stats(2).Centroid(2); sd=sqrt((a-c)^2+(b-d)^2); title(strcat(两个车轮的距离为：,num2str(sd))); hold off 4.求两个同心圆的半径差 clear close all clc RGB=imread(yuan.jpg);%读入图像 I = rgb2gray(RGB); threshold = graythresh(I); BW = im2bw(I,threshold); dim = size(BW); col = round(dim(2)/2); row = min(find(BW(:,col))); connectivity = 8; num_points = 180; contour = bwtraceboundary(BW, [row, col], N, connectivity, num_points); % imshow(RGB,notruesize); % hold on; %plot(contour(:,2),contour(:,1),g,LineWidth,2); x = contour(:,2); y = contour(:,1); abc=[x y ones(length(x),1)]\[-(x.^2+y.^2)]; a = abc(1); b = abc(2); c = abc(3); xc = -a/2; yc = -b/2; radius1 = sqrt((xc^2+yc^2)-c) %figure img4=BW(15:170,15:170); img4=imclearborder(img4,8); imshow(img4) dim = size(img4); col = round(dim(2)/2); row = min(find(img4(:,col))); connectivity = 8; num_points = 180; contour = bwtraceboundary(img4, [row, col], N, connectivity, num_points); % imshow(img4,notruesize); % hold on; % plot(contour(:,2),co