应用夹点技术确定再生水用量研究.pdfVIP

2008 年中国过程系统工程年会会议论文集 应用夹点技术确定再生水用量 1 1 2 1 刘彩洪 ，贾小平 ，李会泉 ，项曙光 1 2 （青岛科技大学炼油化工研究所，山东，青岛，266042 ； 中国科学院过程工程研究所，北京，100080） 摘要：工业节水及废水减排已成为过程工业持续发展的前提。运用目标导向的夹点分析技术对过程用水系统进行系 统地分析，可确定过程用水和废水排放量的最小目标。以固定再生出口浓度为基准，本文提出基于累积流量－累积 污染质量负荷组合曲线图的夹点分析方法，确定水网络的最小再生水流量。 关键词：水系统；夹点技术；组合曲线图；最小再生水用量 中图分类号：TQ021 文献标识码：A 文章编号： Targeting Regeneration Water Flowrate Using Water Pinch Analysis 1 1 2 1 LIU Cai-Hong , JIA Xiao-Ping , LI Hui-Quan , XIANG Shu-Guang 1 Institute For Petroleum and Chemical Industry, Qingdao University Science Technology ，Shandong, （ Qingdao 266042; 2Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100080 ） Abstract ：Industrial water saving and wastewater reduction have become the premise for industrial sustainable development. To reach such goal, systematic process integration technologies, such as target-oriented pinch technology, are required to determine the targets of minimum water usage and wastewater discharge. Regeneration allows further reduction of the water flowrates after the opportunities for water saving. The aim of this work is to present a new water pinch analysis technology which can help process analysts to determine the target of minimum regeneration water flowrate at fixed outlet concentration. The composite curves of the targeting procedure are plotted on a diagram of cumulative load versus cumulative flowrate. Key words: Water system; Pinch technology; Composite curve; Minimum regeneration water flowrate 引 言 水的再生利用或者再生循环是节水减排的重 水是所有过程工业都需要的重要资源。近年