Oracle Solaris11 安装步骤--on SPARC.docxVIP

Oracle Solaris11安装步骤-- on SPARC?听说只能装t和M 系列 ? it is nice if you reply 。Step by step guide to install Oracle Solaris 11 on SPARC machine:Step 1)?First step is to ensure that your hardware supports Oracle Solaris 11 Operating System. If you are unsure, please visit the below URL and check the compatibility list:/webfolder/technetwork/hcl/data/s11ga/index.htmlDon’t just assume that since you already have Solaris 10 running, it will support Solaris 11 too.Step 2)?If you are not going to install it on a blank hard disk, please ensure to backup your data before proceeding.Step 3)?Please have the Solaris 11 DVD ready with you. You can download Solaris 11 operating system iso image here:/technetwork/server-storage/solaris11/downloads/index.htmlSelect ‘Download for SPARC – Text Install’. Please check MD5 checksun to ensure the downloaded file is not corrupt. After having downloaded this image, please write it to DVD using any ISO burner (such as Active ISO Burner).Step 4)?Connect to the system console either via iLO/ALOM etc through serial cable or ssh/telnet over the network in case of remote management configured.Step 5)?Login to the console, in the example case a T2000 machine has been used.Step 6)?On sc or rsc prompt type console –f and console respectively and hit enter. You will now get OK prompt, if you powered on the server. In case if you are upgrading from Solaris 10, you will need to bring the server to OK prompt by typing init 0 or any other method you prefer. Please note, you cannot do a version upgrade from Solaris 10 to Solaris 11. There are several differences in these two versions, many features are now obsolete. Solaris 11 has to be a fresh install.Step 7)?Make sure Solaris 11 DVD is inserted in the DVD drive. Now type ‘boot cdrom’ without quote on OK prompt to begin installation as shown in the below screenshot:Step 8)?The pre-installation phase or requirements gathering phase will being. Oracle Solaris 11 will ask several questions with options to you. Th