PIC的I2C读写程序.docVIP

PIC的I2C读写程序 **************************************** * PIC的I2C读写程序 * **************************************** TITLE TWO WIRE/I2C BUS INTERFACE WITH PIC16C5x ; LIST P=16C54 ; ;***************************************************************************** ;** Two wire/I2C Bus READ/WRITE Sample Routines of Microchips ;** 24Cxx / 85Cxx serial CMOS EEPROM interfacing to a ;** PIC16C54 8-bit CMOS single chip microcomputer ;** Revsied Version 2.0 (4/2/92). ;** ;** Part use = PIC16C54-XT/JW ;** Note: 1) All timings are based on a reference crystal frequency of 2MHz ;** which is equivalent to an instruction cycle time of 2 usec. ;** 2) Address and literal values are read in octal unless otherwise ;** specified. ; ; ; Program: I2CBUS.ASM ; Revision Date: ; 12-12-95 Compatibility with MPASMWIN 1.30 ; ;********************************************************************** ; ;***************************************************************************** ; ; ; Files Assignment ; ; PC EQU 2 ; Program counter STAT EQU 3 ; PIC status byte FSR EQU 4 ; File Select Register RA EQU 5 ; Port A use to select device address RB EQU 6 ; RB7 = SDA, RB6 = SCL ; STATUS EQU 08 ; Status register FLAG EQU 09 ; Common flag bits register EEPROM EQU 0A ; Bit buffer ERCODE EQU 0B ; Error code (to indicate bus status) ADDR EQU 10 ; Address register DATAI EQU 11 ; Stored data input register DATAO EQU 12 ; Stored data output register SLAVE EQU 13 ; Device address (1010xxx0) TXBUF EQU 14 ; TX buffer RXBUF EQU 15 ; RX buffer COUNT EQU 16