瓷质焊接衬垫包装生产线的设计-包装工程.PDFVIP

第 38 卷 第 21 期 包 装 工 程 2017 年 11 月 PACKAGING ENGINEERING ·154 · 瓷质焊接衬垫包装生产线的设计 刘怀海 1 ，傅向葵 2 ，肖雪 1 ，张国全 2 （1.长江大学工程技术学院，荆州 434020 ；2.武汉轻工大学，武汉 430000 ） 摘要： 目的 开发一套瓷质焊接衬垫全自动包装生产线，以降低企业生产压力，提高生产效率。方法 基 于衬垫的物性，采用输送带分隔提升，消除瓷质焊接衬垫多块重叠问题；利用模式识别技术，提出输送 带上8 种姿态的瓷质焊接衬垫的外形识别方法；根据辊盘划线原理，提出瓷质焊接衬垫组中心线绘制的 工艺方法。结果 将20 块同向瓷质焊接衬垫有序排列且粘贴在基材上，实现了衬垫组粘贴的自动化。结 论 通过对瓷质焊衬垫包装技术的研究，提出了外形复杂且同向排序的工艺方法。 关键词：瓷质；衬垫；衬垫排序；姿态识别；划线 中图分类号：TB487 文献标识码：A 文章编号： 1001-3563(2017)21-0154-05 Design of Packaging Production Line for Ceramic Welding Backing 1 2 1 2 LIU Huai-hai , FU Xiang-kui , XIAO Xue , ZHANG Guo-quan (1.Yangtze University College of Technology Engineering, Jingzhou 434020, China; 2.Wuhan Polytechnic University, Wuhan 430000, China) ABSTRACT: The work aims to develop a set of automatic packaging production line for ceramic welding backing, in order to reduce the enterprise production pressure and improve the production efficiency. Based on the physical properties of backing, the conveyor belt was used for separating and ascension to eliminate the multi-block overlap of ceramic welding backing. Pattern recognition technology was used to propose the shape recognition method for ceramic weld- ing backing of eight postures on the conveyor belt. According to the principle of the roller plate line, the technological approach drawing a center line was put forward for ceramic welding backing set. 20 blocks of synclastic ceramic weld- ing backing were arranged orderly and pasted on