疏水性中空纤维膜组件操作过程模拟ProcessSimulationforModule.PDF

31 5 V o.l 31 N o. 5 2008 10 Journa l o f N anjing Inst itute o fM eteoro logy Oct. 2008 , , , . [ J] . , 2008, 31 5) : 7 18-722. 陆建刚, 郑有飞, 杨艳, 徐建强, 陈敏东 ( , 2 10044) : 采用疏水性中空纤维膜组件和去离子水分离混合气中CO , 研究了气液流速混合气 CO 浓 2 2 度和操作温度 及膜形态等因素对总传质系数的影响通过传质阻力层方程和质量微分方程的关 联, 建立了新型数学模型, 模拟了各种条件下的传质过程结果表明, 流体力学状态的改变能够加 强传质, 但加强程度有限; 提高气相 CO 浓度能够提高总传质系数; 具有高孔隙率的膜组件拥有高 2 传质系数; 提高操作温度能够促进扩散, 提高传质系数, 在较高温度下, 存在膜孔湿润的现象模型 能够较好地模拟膜接触器) 物理吸收过程, 模型值能够较准确地反映疏水性中空纤维模组件传质 过程 : 疏水性中空纤维膜; CO ; 物理吸收; 数学模型 2 : X 610 : A : 1000-2022 200 8) 05-0718-05 Process Simulation forModule Operation of HydrophobicHollow FiberM embrane LU J ian-gang, ZH ENG Y ou-fei, YANG Y an, XU J ian-qiang, CH EN M in-dong Schoo l of E nvironm ental S cience and Eng ineering, NU IST, N anjing 2 10044, C h ina) Abstract: Separat ion of CO2 from the gas m ix ture w as perfo rm ed by a module w ith the hydrophob ic PP po lypropy lene) m icropo rou sm em brane and using the de ion w ater. E ffects of gas and liqu id f low rates, CO2 concentration and operation tem peratures as w ell asm em brane configuration on overall m ass transfer coeffic ient w ere investigated. A m athem atical m ode lw as presented by correlat ing the resistance in ser ies and the m ass d ifferentia l equation. M ass transfer w as smi ulated under the variou s operation conditions. R e- su