累积复合轧制对镁合金组织和力学性能的影响-中国有色金属学报.PDF

18 9 2008 9 Vol.18 No.9 The Chinese Journal of Nonferrous Metals Sep. 2008 1004-0609(2008)09-1607-06 ( 710055) MB2 MB2 MB2 ARB 17.8 µm 1.2 µm300 MPa 82.1 ARB1 24% 11.2%ARB 22.5% MB2 TG 146.2 A Effect of accumulative roll bonding on microstructures and mechanical properties of MB2 magnesium ZHANG Bing, YUAN Shou-qian, ZHANG Xi-feng, LÜ Shuang, WANG Chao (School of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China) Abstract: MB2 magnesium alloy was deformed by accumulative roll bonding (ARB) technology. The microstructures and mechanical properties of MB2 magnesium alloy after different pass ARB were observed and analyzed by optical microscopy, TEM and tensile testing machine. The results show that the average grain size is refined from 17.8 µm to 1.2 µm after MB2 magnesium alloy is deformed by ARB process. The tensile strength and microhardness rise to 300 MPa and 82.1, respectively. The elongation rate after ARB1 decreases from 24% to 11.2%. With the increase of ARB rolling pass, the homogeneous of materials is improved, the tensile strength and hardness change relatively smooth, but the elongation rate rise to 22.5%. Key words: MB2 magnesium alloy; accumulative roll bonding(ARB); microstructure refinement; mechanical properties [1] [1] (SPD) (HCP)(Al) (ECAP)[2−3](HPT)[4](MF)[5] (CE