工业控制现场总线电缆.docVIP

工业控制现场总线电缆 Fieldbus cable used in industrial control system 工业控制现场总线电缆 Fieldbus cable used in industrial control system 产品特点及用途 用于工业控制系统的全数字、串行、双向通信的现场总线网络中，将传感器、执行器及控制器等现场设备互相连接起来。还可以通过现场总线将用于过程和制造自动化的仪表连接为局域网。该总线电缆符合基金会现场总线（FF）电缆的要求。 Ⅰ. Characteristics and Application The fieldbus cables are used to connect fieldbus devices such as transducers,actuators and controllers etc.in fieldbus network with digital,serial and two-way communication industrial control system.It can also be used to connect process and manufacture automatic instruments into LAN. The fieldbus cable conform to the FF requirement. 产品执行标准 CEI IEC 61158-2 Ⅱ. Implemented standard CEI IEC 61158-2 使用特性 额定电压 U0/U：300/500V 工作温度：PE -40～75℃ PVC -40～75℃ FEP -40～75℃ 安装敷设温度：不低于0℃ 电缆允许最小弯曲半径：非铠装电缆应不小于电缆外径的8倍 铠装电缆应不小于电缆外径的16倍 Ⅲ. Application characteristics Rated AC Voltage U0/U: 300/500V Operating temperature: PE -40～75℃ PVC -40～75℃ FEP -60～200℃ Mounting deploying temperature: Not under 0℃ Allowed minimum bending radius:Not smaller than 8 times outer diameter for armoured cable Not smaller than 16 times outer diameter for non-armoured cable 四、型号说明 Ⅳ. Type illustration WDZ – F L1 – Y33 – A 3 × 2 ×0.8（7×26AWG） 规格代号 Specification code 类型代号 Type code 结构代号 Structure code 速率代号 Velocity code