超精密加工参数之探讨StudyonWorkingParametersofUltra-precision.PDFVIP

精參數 Study on Working Parameters of Ultra-precision Machining Kuo-Ming Tsai 立 益精 Associate Professor Institute of Precision Machinery Manufacturing Technology National Chin-Yi Institute of Technology Chia-Chin Wu 立 益 Part-time Lecturer Department of Mechanical Engineering National Chin-Yi Institute of Technology 數 益 車 來劣度 車 參數金度狀 切度 率參數 行 切度率切 切 度率 度 精度若 降度降精 精度 精車 參數 Abstract With the increasing demand for slimmer digital camera, polymer optical lenses have found applications in various sectors. Single-point diamond turning is widely used to manufacture inserts of injection molds for plastic optical lenses. The waviness and roughness are important quality characteristics of machined inserts. The current study performed an experimental investigation of the waviness, roughness and dimensional tolerance of inserts under various working conditions. The experimental parameters include the depth of cut, feed rate, spindle speed as well as whether or not anti-vibration foundation under the machine is setup. The result of this study revealed a close relationship between the machining parameters and the quality of machined parts. The results 36 indicated that parts machined with smaller depths of cut and lower feed rates result in better surface waviness and tighter error in radius. The surface waviness is found to be inversely proporti