斯巴鲁森林人汽车维修手册-MSA5T0720A161722 note.pdfVIP

Note NOTE 1. Note A: NOTE This is the information that can improve the effi- ciency of maintenance and assure the sound work. 1. FASTENER NOTICE Replace the nonreusable parts with new parts. Check the tightening torque and tighten to the specified torque. Do not apply paint, lubricant, rust retardant or other substance to the surface around bolts, nuts, etc. Doing so will make it difficult to obtain the correct torque and result in looseness and other problem. 2. STATIC ELECTRICITY DAMAGE Do not touch the control modules, connectors, logic boards and other such parts when there is a risk of static electricity. Always use a static electricity pre- vention cord or touch grounded metal for the elimi- nation of static electricity before conducting work. 3. BATTERY When removing the battery cables, always be sure to turn the ignition switch to OFF to prevent electri- cal damage to the control module from overcurrent. 4. SERVICE PARTS Use genuine parts for maximum performance and maintenance when conducting repairs. Subaru/FHI will not be responsible for poor performance result- ing from the use of parts except for genuine parts. 5. PROTECTING VEHICLE UNDER MAIN- TENANCE Make sure to attach the fender cover, seat covers, etc. before work. 6. ENSURING SAFETY DURING WORK When working in a group of two or more, perform the work with calling each other to ensure mutual safety. NT-2 Note NOTE 7. LIFTS AND JACKS When using a lift or shop jack to raise a vehicle or using rigid racks to support a vehicle, always follow in- structions concerning jack-up points and weight limits to prevent the vehicle from falling, which