Centos6_批量自动安装系统_kickstart.docxVIP

Centos6 kickstart+nfs+dhcp+tftp配置主要步骤：将光盘中的文件拷贝到kickstart服务器上设置NFS设置TFTP设置DHCP配置Kickstart配置PXE引导配置客户端机器将光盘中的文件拷贝到kickstart服务器上：挂载光驱：ll /dev |grepcdrom #查看光驱设备[root@server ~]# ll /dev |grepcdromlrwxrwxrwx 1 root root 3 May 31 00:52 cdrom -sr0查看得知光盘对应设备为：/dev/sr0Mkdir /mnt/cdrom #建立光盘挂载目录Mkdir /kickstart #建立安装文件主目录Mkdir /tftpboot #建立引导文件目录Mkdir /tftpboot/pxelinux.cfg修改fstab，使得光盘自动挂载：[root@server ~]# echo /dev/hdc /mnt/cdrom iso9660 defaults 0 0 /etc/fstab [root@server ~]# vi /etc/fstabLABEL=/ / ext3 defaults 1 1LABEL=/home /home ext3 defaults 1 2LABEL=/boot /boot ext3 defaults 1 2tmpfs /dev/shmtmpfs defaults 0 0devpts /dev/ptsdevptsgid=5,mode=620 0 0sysfs /sys sysfs defaults 0 0proc /procproc defaults 0 0LABEL=SWAP-sda5 swap swap defaults 0 0/dev/hdc /mnt/cdrom iso9660 defaults 0 0Mount –a #挂载显示挂载信息：[root@server ~]# mount/dev/sda2 on / type ext3 (rw)proc on /proc type proc (rw)sysfs on /sys type sysfs (rw)devpts on /dev/pts type devpts (rw,gid=5,mode=620)/dev/sda3 on /home type ext3 (rw)/dev/sda1 on /boot type ext3 (rw)tmpfs on /dev/shm type tmpfs (rw)none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)/dev/sr0 on /mnt/cdrom type iso9660 (ro)Cd /mnt/cdromCp–r ./* /kickstart #将光盘文件全部拷贝到安装文件目录[root@server ~]# cp /etc/yum.repos.d/CentOS-debuginfo.repo /etc/yum.repos.d/server.repo#拷贝一份yum配置模板server.repo[root@server ~]# vi /etc/yum.repos.d/server.repo[core]#设置名称为core，后面配置sytem-config-kickstart时才能看到软件包的选取界面name=CentOS-6 X86_X64baseurl=file:///kickstart/Serverenabled=1 #启用yum源gpgcheck=0gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6enabled=0[root@server ~]# yum list#查看yum源可用配置成功安装必要的组件：