基于GSM的远程温控单元设计.doc

基于GSM的远程温控单元设计 摘要 基于GSM短消息的业务不需要建立拨号连接，只需把待发的消息加上目的地址发送至短消息中心，再由短消息中心转发到最终目的地GSM（Global System for Mobile communication）短消息的新型远程监控系统，该系统充分利用了GSM无线移动通信网络平台，可以实时、自动、方便、可靠地实现现场温度的远程通信报警和监控，同时也适合于其他远程数据传输和无人值守的场合。 为了能实时的监控现场温度，本文采用A/D芯片进行模数转换，利用DSP的实时处理能力，将采集到的温度定时显示在现场监测屏上，远方监测中心使用GSM短消息业务向现场发送控制命令，现场接收到控制命令后通过对模拟温箱的通断实现温度的升降调节和向监测中心反馈当前温度值。 本设计是建立在实验室提供的硬件平台基础上的，本文详细介绍了各硬件模块，并且编写了相应的程序进行了测试，最后完成了整个系统的调试，调试结果充分验证了设计方案的合理性和正确性。 关键词：DSP DESIGN OF REMOTE TEMPERATURE CONTROL UNIT BASED ON GSM Abstract The SMS（） business based on GSM does not require the establishment of dial-up connection, just add the destination address to the message ready to send and send the message to the Short Message Service Center,then transmit the message to the final destination by Short Message Service Center. The SMS business has many features, such as simplicity, low-cost communication, high spectrum efficiency, good confidentiality.etc. In this paper, a new type of remote monitoring and control systems based on GSM short message has been introduced. The system makes full use of wireless mobile communication network platform of GSM to achieve the long-distance communication of temperature alarm and monitoring real-time, automatically, conveniently and reliably. The system is also suitable for other long-distance data transmission and unattended occasions. In order to monitor and control the temperature of the scene real-time, this paper has used analog-to-digital converter chip which is high-speed and high-precision, and has applied DSP with real-time processing capability to collect temperature regularly and display it on the monitoring screen on-site. Remote monitoring center use SMS to send control commands to the scene. The scene in accordance with the commands received to control the rise and fall of temperature through the on-off control of the simulative temperature box, and to return current temperature to the monitoring center. The design is established on the hardware platform in t