工程机械用960MPa级调质钢板的淬火工艺研究-Journalof.PDFVIP

第32 卷第1期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol132,No. 1 2011 年 1月 Journal of Northeastern niversity( Natural Science) Jan. 2 0 1 1 960 MPa 1 2 1 1 康 健 , 卢 峰, 王昭东 , 王国栋 ( 1. , 110819; 2. , 063000) : 960MPa , : # , , 900 e , 15~ 25 min , R p012= 1 110MPa, R m= 1 140MPa, A = 14%,- 40 e A kV= 130 J, GB/ T 16270) 2009 # : ;; ;; : TG 142.4 : A : 1005-3026(2011)01-0052-04 Study on Quenching Process of 960 MPa Quenched and Tempered Steel Plates for Construction Machinery 1 2 1 1 K A N G Ji an , L U Feng , WA N G Zhao-dong , WA N G G uo-dong ( 1. The State Key Laboratory of Rolling and Automation, Northeastern niversity, Shenyang 110819, China; 2. Wide Heavy Plate Project Manager Department of Tangshan Iron and Steel Corporation, Tangshan 063000, China. Corresponding author: KANG Jian, E-mail: wwwkangjian @ 126.com) Abstract: To develop the Q960 high-strength quenched and tempered steel plates, the effects of quenching treating regime on the microstructure and mechanical properties of plate specimens were investigated. The results showed that the dissolution and distribution of alloying elements and the original austenite grain size are determined by quenching temperature and holding time and, finally, the overall mechanical properties are obviously affected by the quenching process parameters, and the excellent overall properties of specimens can be obtained when the quenching temperature is 900 e with holding time 15~ 25 min, i. e., the yield strength is 1 110 MPa, tensil